The ANPA AP-104EX is a versatile PoE extender (repeater) that solves one of the most common problems in surveillance and wireless deployments: powering and connecting PoE devices that sit beyond the standard 100-meter cable run. Its innovative 3-in-1 design works as a 1-to-4, 1-to-2 or 1-to-1 PoE extender, drawing power from the upstream PoE switch — no local power adapter required. Cascade up to three units to chain power and data across long distances, reaching remote cameras and APs without pulling new cable runs or installing mid-span power. Compact, weather-tolerant and standards-compliant (IEEE 802.3af/at), the AP-104EX is the installer’s shortcut for extending PoE networks quickly and affordably. Request a quote for volume and OEM/ODM pricing.
ANPA sells factory-direct with wholesale and OEM/ODM terms. Pricing is quoted per project — contact our sales team for volume discounts and lead times.
Product Specifications
| Model | AP-104EX |
|---|---|
| Category | POE Switch Accessories |
| Ports Configuration | 3/5 |
| Transmission Rate | 10/100Mbps |
| PoE Standard | IEEE 802.3af/at |
| Power Budget | 30W |
| Key Features | 3-in-1 Design |
| MOQ | 2 pieces |
Product Overview
A PoE extender repeats and regenerates both data and PoE power mid-cable, breaking the 100-meter Ethernet barrier without adding a powered switch or AC outlet. The AP-104EX connects to any standard PoE switch via its uplink port, receives power over that cable, and uses that power to forward data and PoE to downstream devices — making it a true “powered-by-PoE” repeater that installs in seconds with zero infrastructure.
The 3-in-1 port design adapts to the job. Use it as a 1-to-4 extender to fan out one PoE line to four cameras, as a 1-to-2 extender to split to two devices, or as a 1-to-1 pure repeater for a single long run. This flexibility means one SKU covers most extension scenarios, reducing installer inventory. Supporting IEEE 802.3af/at with up to 30W throughput, it works with the vast majority of cameras, APs and IP phones.
For very long distances, units can be cascaded up to three levels, and ANPA’s 250m extend mode (when used with compatible switches) stretches each stage beyond the standard 100 meters. This lets integrators reach cameras deep in parking lots, along perimeter fences or across large floors while keeping the PoE power source centralized at the switch — simplifying UPS backup and maintenance.
The extender features auto-MDI/MDIX, plug-and-play operation, and per-port electrical protection. Its compact enclosure suits pole, wall and ceiling mounting near the remote devices. Every AP-104EX is CE, FCC and RoHS certified and manufactured in ANPA’s Chaozhou factory under the same 9-step quality process — with 100% inspection and PoE load testing — as our switches.
Application Scenarios
Long-Distance Camera Deployment
Reach cameras beyond 100 meters — in large parking lots, perimeter fences, warehouses and estates — by inserting an AP-104EX mid-run. It regenerates PoE and data without an AC outlet, and cascades up to three levels for very long runs.
PoE Signal Relay & Distribution
Split a single PoE drop to multiple devices: a 1-to-4 extender fans out to four cameras from one cable, reducing the number of switch ports and cable pulls needed at the edge of a deployment.
Multi-Stage Cascaded Extension
Chain up to three extenders to carry power and data across very large sites — from a central switch through repeaters to the farthest camera — while keeping all power sourced and backed up at the head-end switch.
Retrofits & Cable Reuse
In existing buildings where running new cable is impractical, place extenders along current Cat5e/Cat6 runs to add or relocate cameras and APs without new conduit, power outlets or switch hardware.
Why Choose ANPA
ANPA has manufactured PoE networking equipment since 2006 — 20 years of production experience. Every switch and accessory is built in our single 15,000 m² facility in Chaozhou, Guangdong (with a dedicated R&D center in Shenzhen), across 8 production lines and 16 sets of assembly and test equipment. Our 3 R&D engineers and 7 QA/QC specialists enforce a rigorous 9-step quality control process with 100% inspection, full-load burn-in and CE, FCC and RoHS certification on every batch.
- 3-in-1 mode (1-to-4 / 1-to-2 / 1-to-1) — one extender covers most edge scenarios, lowering inventory.
- Powered entirely by the upstream PoE switch: no local power adapter or AC outlet required.
- Cascade up to three levels with 250m extend mode for far-reaching coverage from a centralized power source.
- Made in ANPA’s 15,000 m² Chaozhou factory with 100% PoE-load QC testing; CE/FCC/RoHS.
Compatible & Related Products
The AP-104EX works with any standard 802.3af/at PoE switch, including the AP-1024MN, AP-1028PE and AP-3028GE. For fiber-based long-distance links, see the AP-3102AB-SC fiber converter.
Frequently Asked Questions
1. How does a PoE extender work?
It connects inline between a PoE switch and the powered device. The extender draws PoE power from the switch over the incoming cable, then regenerates the data signal and forwards PoE power to the downstream device over the next cable run — all without a separate power supply.
2. Does the AP-104EX need a power adapter?
No. It is powered by the upstream PoE switch over the same cable that carries data. You only need the switch, standard Cat5e/Cat6 cabling and the extender — no AC outlet near the remote devices.
3. What is the maximum extension distance?
Each stage regenerates the signal for another full cable run. In standard mode that is up to 100 meters per stage; with ANPA’s 250m extend mode on compatible switches, each stage can reach 250 meters. Cascading up to three units extends coverage accordingly.
4. What does 1-in-4-out / 1-in-2-out mean?
The same unit operates in three modes: 1-to-1 (one cable in, one device out for pure repetition), 1-to-2 (split to two devices) and 1-to-4 (fan out to four devices). You choose the wiring/port arrangement to match how many remote cameras or APs you need.
5. How many extenders can I chain together?
Up to three AP-104EX units can be cascaded in series, each regenerating PoE and data. This enables very long deployments while keeping power sourced at the main PoE switch (so a single UPS protects the whole chain).
6. Is PoE power reduced when using an extender?
The extender consumes a small amount of power itself and forwards the remainder. It supports 802.3af/at up to 30W class; when splitting to multiple outputs, total downstream power is shared. For high-power PTZ or bt devices, contact ANPA for power-budget guidance.
7. Can the extender be used outdoors?
The compact, ruggedized unit is suitable for wall/pole mounting in sheltered and protected outdoor locations; for fully exposed or weatherproof installations, place it in an appropriate enclosure. Fiber converters are recommended for very long or lightning-prone outdoor links.
8. Does ANPA offer OEM/ODM for the extender?
Yes. ANPA manufactures the AP-104EX in-house and provides private-label branding, custom packaging and documentation with a low MOQ (2 pieces). Request a quote for volume and customization terms.
Get a Quote from the Manufacturer
Ready to specify the AP-104EX for your project? ANPA ships factory-direct worldwide with flexible MOQs, OEM/ODM customization and CE/FCC/RoHS documentation. Tell us your port count, power and quantity requirements and our team will reply with pricing and lead time.
ANPA sells factory-direct with wholesale and OEM/ODM terms. Pricing is quoted per project — contact our sales team for volume discounts and lead times.