The ANPA AP-30318GE is an 18-port full-gigabit PoE switch built to power medium-density Wi-Fi 6/7 access points, 4K/8MP cameras and gigabit office endpoints from a single rack-mount unit. It provides 16 gigabit PoE ports, two gigabit copper uplinks and one SFP fiber slot, all running at 10/100/1000Mbps with IEEE 802.3af/at/bt support and a 200W power budget. A 52Gbps wire-speed switching fabric, built-in QoS and a stackable metal chassis make the AP-30318GE a dependable floor-aggregation switch for hotels, schools, enterprise offices and large surveillance projects. Request a quote for volume and OEM/ODM pricing.
ANPA sells factory-direct with wholesale and OEM/ODM terms. Pricing is quoted per project — contact our sales team for volume discounts and lead times.
| Model | AP-30318GE |
|---|---|
| Category | POE Switch (Gigabit) |
| Ports Configuration | 16 GE + 2 GE Uplink + 1 SFP |
| Transmission Rate | 10/100/1000Mbps |
| PoE Standard | IEEE 802.3af/at/bt |
| Power Budget | 200W |
| Switch Capacity | 52Gbps |
| Key Features | QoS, Stackable |
| MOQ | 2 pieces |
Product Overview
The AP-30318GE’s “18-port” configuration combines 16 PoE gigabit ports with 2 dedicated gigabit uplinks — keeping the backbone independent of powered devices — plus an SFP slot for fiber. Every port runs at 1000Mbps, so a 4K camera or Wi-Fi 6 access point gets full throughput without sharing Fast Ethernet bottlenecks. The 52Gbps switching capacity provides wire-speed forwarding across all ports simultaneously, meaning 16 high-bitrate streams can flow to the NVR or core without dropped frames.
PoE support spans af, at and bt. Standard af ports deliver up to 15.4W for basic cameras and phones, at delivers up to 30W for PTZ cameras and Wi-Fi 5/6 APs, and bt supports high-power endpoints. The 200W budget is sized for a realistic mixed load — sixteen standard cameras at 7–15W draw well within budget, leaving headroom for several high-power devices balanced across ports.
The SFP fiber slot is the key backbone feature: install a fiber module to link floor closets to a central equipment room beyond 100 meters, connect separate buildings, or run through electrically noisy areas where copper suffers EMI. Fiber is immune to ground loops and can span kilometers with the right module. Built-in QoS prioritizes voice and video traffic, and the stackable rack-mount chassis installs cleanly in a standard 19-inch cabinet with front-facing diagnostic LEDs. Store-and-forward switching, auto-MDI/MDIX and per-port over-current/over-voltage/short-circuit protection protect both switch and powered devices.
Every AP-30318GE is CE, FCC and RoHS certified and leaves ANPA’s single 15,000 m² Chaozhou factory only after our 9-step quality control, 100% inspection and full-load burn-in — the standard behind 20 years of manufacturing experience.
Application Scenarios
Hotel & Hospitality Whole-Floor Coverage
Sixteen gigabit PoE ports power in-room and corridor Wi-Fi 6 APs, IPTV and IP phones across a hotel floor, with the SFP slot linking the floor closet to the core over fiber. bt support covers high-density lobby and conference APs.
Large-Scale 4K/8MP Video Surveillance
A 52Gbps fabric and sixteen gigabit PoE ports carry dozens of high-resolution camera streams without dropped frames. QoS protects live monitoring while 200W supports a mix of fixed and PTZ cameras.
Enterprise Gigabit Office Networks
Power gigabit IP phones, desktop links and ceiling APs on one switch. Full gigabit to every PoE port keeps video conferencing, cloud apps and large file transfers responsive.
School & Campus Wireless Deployments
Classrooms, auditoriums and libraries add Wi-Fi 6/7 APs each term. The AP-30318GE powers sixteen APs per wiring closet and aggregates to the campus core via the SFP fiber uplink.
Why Choose ANPA
ANPA has manufactured PoE networking equipment since 2006 — 20 years of production experience. Every switch and accessory is built in our single 15,000 m² facility in Chaozhou, Guangdong (with a dedicated R&D center in Shenzhen), across 8 production lines and 16 sets of assembly and test equipment. Our 3 R&D engineers and 7 QA/QC specialists enforce a rigorous 9-step quality control process with 100% inspection, full-load burn-in and CE, FCC and RoHS certification on every batch.
- 16 gigabit PoE ports + 2 gigabit uplinks + SFP in one rack-mount, stackable unit.
- 802.3af/at/bt support and 200W budget for Wi-Fi 6/7 APs and 4K/8MP cameras.
- 52Gbps wire-speed switching capacity — no oversubscription under full load.
- QoS for voice/video priority and SFP fiber for long-distance, EMI-immune backbones.
- Manufactured in ANPA’s single 15,000 m² Chaozhou facility; 100% QC inspection, CE/FCC/RoHS.
Compatible & Related Products
Deploying a larger site? Step up to the 24-port AP-30324GE with dual SFP and AI watchdog, or scale down to the 8-port AP-3038GE for smaller closets. Compare the full gigabit PoE series, add web-managed VLAN/QoS control with the AP-3344GE, and extend remote runs with the AP-104EX PoE extender.
Frequently Asked Questions
1. How many devices can the AP-30318GE power?
It provides 16 gigabit PoE ports plus 2 uplinks (the SFP slot is for the backbone, not PoE). With a 200W budget it comfortably powers sixteen standard cameras or af/at Wi-Fi APs. If you connect several maximum-draw bt devices, balance them across ports so total draw stays within 200W.
2. Why does an 18-port switch have 16 PoE ports?
The configuration is 16 GE PoE + 2 GE uplink + 1 SFP. The two copper uplinks are dedicated to the network/core (no PoE), and the SFP slot accepts a fiber module. This keeps powered-device traffic separate from the backbone.
3. When should I use the SFP fiber slot?
Use SFP fiber when the backbone exceeds 100 meters, links separate buildings, or crosses electrically noisy environments near power cabling or machinery. Fiber is immune to EMI and ground loops and can span kilometers with the appropriate module.
4. Is 200W enough for 16 Wi-Fi 6 access points?
For typical af/at APs drawing 15–30W each, average consumption fits within budget even though worst-case peak may exceed it. Distribute high-power bt APs across switches or standardize on a mix; ANPA can recommend a higher-budget configuration for all-bt high-density designs.
5. Does the AP-30318GE support 802.3bt high-power PoE?
Yes. It supports IEEE 802.3af/at/bt, auto-negotiating power with each device. bt enables high-power endpoints such as advanced Wi-Fi 6/7 APs and high-end PTZ cameras that need more than the 30W PoE+ limit.
6. What does the 52Gbps switching capacity mean?
It indicates the fabric can forward traffic on all ports at full gigabit simultaneously without oversubscription. With 16 PoE ports, 2 uplinks and SFP, 52Gbps provides the aggregate bandwidth for true wire-speed performance under full load.
7. Can ANPA supply this switch under OEM/ODM?
Yes. ANPA manufactures the AP-30318GE in-house and offers custom logo/labeling, packaging, firmware branding and configuration with an MOQ of 2 pieces. Contact us for a project-specific quotation and lead time.
Get a Quote from the Manufacturer
Ready to specify the AP-30318GE for your project? ANPA ships factory-direct worldwide with flexible MOQs, OEM/ODM customization and CE/FCC/RoHS documentation. Tell us your port count, power and quantity requirements and our team will reply with pricing and lead time.
ANPA sells factory-direct with wholesale and OEM/ODM terms. Pricing is quoted per project — contact our sales team for volume discounts and lead times.