The ANPA AP-10224KE is a high-capacity 24-port Fast Ethernet PoE+ switch built as the power core for large surveillance systems and building-wide PoE deployments. It combines 24 PoE ports, two gigabit copper uplinks and a gigabit SFP fiber slot with a robust 400W power budget — enough to drive two dozen cameras, wireless APs and PoE devices across a floor, a building or a campus. Rack-mountable for standard 19-inch cabinets and equipped with 250m extend mode, AI watchdog and intelligent QoS, the AP-10224KE gives integrators the port density, power headroom and fiber uplink flexibility that demanding projects require, all at direct-from-factory pricing. Request a quote for project and OEM/ODM pricing.
ANPA sells factory-direct with wholesale and OEM/ODM terms. Pricing is quoted per project — contact our sales team for volume discounts and lead times.
Product Specifications
| Model | AP-10224KE |
|---|---|
| Category | POE Switch (10/100M) |
| Ports Configuration | 24 FE + 2 GE Uplink + 1 SFP |
| Transmission Rate | 10/100Mbps |
| PoE Standard | IEEE 802.3af/at |
| Power Budget | 400W |
| Switch Capacity | 16Gbps |
| Key Features | QoS, Stackable, 250m Extend, AI Watchdog |
| MOQ | 1 piece |
Product Overview
At the heart of the AP-10224KE is a 400W PoE power plant distributed across 24 auto-sensing 802.3af/at ports. That budget is sized for real-world CCTV loads: even twenty-four cameras at 15.4W each (the af ceiling) would total ~370W, leaving safety margin, and typical 7–10W cameras use only a fraction of capacity. Mixed deployments — cameras, PTZ units, door controllers and APs — run comfortably without per-port power rationing.
The uplink design sets this switch apart. Two gigabit RJ45 uplinks aggregate up to 24 PoE ports to the NVR or core network at 1000Mbps — preventing the uplink bottleneck that occurs when 24 cameras share a single Fast Ethernet backbone. A hot-pluggable SFP slot accepts fiber modules for long-distance, electrically isolated connections to a distant equipment room or between buildings, immune to EMI and ground-loop interference.
Installers benefit from the same self-healing features as the rest of the range: 250m extend mode for long cable runs to perimeter cameras, an AI watchdog that auto-reboots unresponsive devices, and DIP-selectable VLAN and QoS that segregates surveillance traffic and prioritizes video to prevent recording dropouts. Per-port over-current, over-voltage, short-circuit and surge protection safeguard connected equipment, and front-panel LEDs give at-a-glance diagnostics.
Housed in a rack-mount metal chassis with fan-assisted cooling rated for continuous duty, the AP-10224KE is engineered for 19-inch server cabinets and 24/7 operation. As with every ANPA product, it is CE, FCC and RoHS certified and manufactured in our own Chaozhou facility under a 9-step QC program with 100% inspection and full-load aging before packaging.
Application Scenarios
Core Switch for Large Surveillance Projects
Serve as the PoE core for 16–24 camera systems in factories, warehouses, logistics centers and public venues. Two gigabit uplinks aggregate all camera feeds to the NVR without bottlenecking, while 400W powers the entire camera fleet from one rack unit.
Building-Wide PoE Coverage
In offices and apartments, one AP-10224KE per riser or floor powers hallway APs, cameras and access controllers. The SFP slot links floors back to the main equipment room over fiber, avoiding copper distance limits and electrical noise.
Campus & School Security
Campus deployments span multiple buildings and long cable runs. Use the SFP fiber uplink to connect distant blocks and 250m extend mode for remote perimeter cameras, consolidating dozens of devices onto a managed-power backbone.
Smart Hotel & Hospitality Infrastructure
Hotels standardize on high-port-count PoE for in-room APs, IP phones, door locks and CCTV. The rack-mount form factor, QoS for guest Wi-Fi and AI watchdog make the AP-10224KE well suited to hospitality integrators rolling out room-by-room connectivity.
Why Choose ANPA
ANPA has manufactured PoE networking equipment since 2006 — 20 years of production experience. Every switch and accessory is built in our single 15,000 m² facility in Chaozhou, Guangdong (with a dedicated R&D center in Shenzhen), across 8 production lines and 16 sets of assembly and test equipment. Our 3 R&D engineers and 7 QA/QC specialists enforce a rigorous 9-step quality control process with 100% inspection, full-load burn-in and CE, FCC and RoHS certification on every batch.
- 400W budget + 24 PoE ports removes power anxiety on full-density camera and AP builds.
- Dual gigabit copper uplinks plus an SFP fiber slot deliver backbone speed and long-distance flexibility in one unit.
- Rack-mount 19-inch chassis with status LEDs, fan cooling and full electrical protection for professional installs.
- Built in ANPA’s 15,000 m² Chaozhou factory (8 lines, 7 QC staff, 9-step inspection); CE/FCC/RoHS certified.
Compatible & Related Products
The AP-10224KE pairs with ANPA’s full Fast Ethernet range for smaller satellite closets — the 8-port AP-1028PE and 4-port AP-1024MN. Extend distant cameras with the AP-104EX PoE extender, and compare all models in the 10/100M series selection guide.
Frequently Asked Questions
1. How many cameras can a 24-port PoE switch support?
The AP-10224KE provides 24 PoE ports, so it powers up to 24 PoE devices. Its 400W budget supports 24 standard cameras (7–15W each) with safety margin, and still accommodates several 30W PTZ cameras or APs in a mixed load.
2. Why do 24 PoE ports need gigabit uplinks?
Twenty-four cameras streaming simultaneously can saturate a Fast Ethernet uplink. The two 1000Mbps uplinks (and SFP fiber slot) aggregate that traffic to the NVR/core without a bottleneck, reducing lag and dropped frames in high-density surveillance.
3. When should I use the SFP fiber slot instead of copper uplinks?
Use SFP fiber when the connection exceeds 100 meters, links separate buildings, or runs through electrically noisy environments (near power cabling, industrial machinery). Fiber is immune to EMI and ground loops and can span kilometers with the right module.
4. What is the 400W power budget used for in practice?
It covers the simultaneous draw of all PoE ports: 24 cameras at ~15W use roughly 360W, leaving ~40W margin. Higher-wattage devices (PTZ cameras, outdoor APs up to 30W) can be balanced across ports as long as total draw stays under 400W.
5. Can this switch be rack-mounted?
Yes. The AP-10224KE includes rack-mount ears for standard 19-inch cabinets and features fan cooling and front-facing status LEDs for easy installation and diagnostics in equipment rooms.
6. Does it support long-distance PoE over 100 meters?
Yes. The 250m extend mode carries data and PoE up to 250 meters on designated ports at 10Mbps — useful for perimeter and parking-lot cameras. For even longer or cascaded runs, add ANPA PoE extenders.
7. Is the AP-10224KE suitable for OEM projects?
Absolutely. With a 1-piece MOQ and full OEM/ODM capability, ANPA supports private-label branding, custom firmware, packaging and port configuration for distributors and security integrators. Request a quote for project-specific terms.
Get a Quote from the Manufacturer
Ready to specify the AP-10224KE for your project? ANPA ships factory-direct worldwide with flexible MOQs, OEM/ODM customization and CE/FCC/RoHS documentation. Tell us your port count, power and quantity requirements and our team will reply with pricing and lead time.
ANPA sells factory-direct with wholesale and OEM/ODM terms. Pricing is quoted per project — contact our sales team for volume discounts and lead times.