The ANPA AP-2402S is a waterproof 24V PoE splitter designed for outdoor and exposed installations. It accepts PoE over a single Ethernet cable from an 802.3af/at switch or injector and separates it into data plus 24V power (up to 24W), so non-PoE outdoor devices — weatherproof cameras, wireless APs and access controllers — receive power right at the mounting point. Its waterproof housing withstands rain and humidity without an extra enclosure. Request a quote for volume and OEM/ODM pricing.
ANPA sells factory-direct with wholesale and OEM/ODM terms. Pricing is quoted per project — contact our sales team for volume discounts and lead times.
| Model | AP-2402S |
|---|---|
| Category | POE Switch Accessories |
| Ports Configuration | 1 in 1 out |
| Transmission Rate | 10/100Mbps |
| PoE Standard | IEEE 802.3af/at |
| Power Budget | 24W |
| Key Features | Waterproof |
| MOQ | 2 pieces |
Product Overview
A PoE splitter solves one of the most common field problems: a powered device that has a round DC jack instead of PoE. The AP-2402S connects inline between the PoE source and the device, extracting power from the Ethernet cable and delivering 24V at up to 24W alongside the 10/100Mbps data link. The camera or AP then needs no local AC outlet — power originates at the PoE switch in the equipment room, where a UPS can protect the whole run.
The differentiator is the waterproof housing. Outdoor cameras, pole-mounted APs and gate controllers are exposed to rain, splashes and condensation; the AP-2402S is built to mount directly at the device location in sheltered or exposed outdoor positions (protect connectors against standing water per installation best practice). This eliminates the cost and bulk of an additional weatherproof enclosure for the splitter itself.
The unit supports IEEE 802.3af/at input and 10/100Mbps Ethernet, matching the vast majority of 1080p outdoor cameras and wireless APs. Setup is fully plug-and-play: connect the PoE cable in, connect data and the 24V lead out, and the link powers up with no configuration. It is a low-cost, high-reliability component for outdoor surveillance and wireless projects.
Every AP-2402S is CE, FCC and RoHS certified and leaves ANPA’s Chaozhou factory only after our 9-step quality control and 100% inspection — backed by 20 years of PoE manufacturing experience.
Application Scenarios
Outdoor IP Cameras Without PoE Input
Many weatherproof cameras accept a 24V DC lead rather than PoE. The AP-2402S splits PoE at the camera bracket and supplies 24V power plus data over the existing single cable run.
Pole-Mounted Wireless APs & CPE
Outdoor APs and CPE devices on towers and poles receive power at the mount point; the waterproof splitter avoids running mains power up the pole.
Gate, Barrier & Access Control
Outdoor access controllers and barrier gates often need low-voltage DC far from an outlet. PoE plus a waterproof splitter delivers both data and 24V power from the cabinet.
Temporary & Construction Site Cameras
Rapid-deployment site cameras use long PoE runs from an indoor switch; the waterproof splitter provides reliable 24V power at the camera end in all weather.
Why Choose ANPA
ANPA has manufactured PoE networking equipment since 2006 — 20 years of production experience. Every switch and accessory is built in our single 15,000 m² facility in Chaozhou, Guangdong (with a dedicated R&D center in Shenzhen), across 8 production lines and 16 sets of assembly and test equipment. Our 3 R&D engineers and 7 QA/QC specialists enforce a rigorous 9-step quality control process with 100% inspection, full-load burn-in and CE, FCC and RoHS certification on every batch.
- Waterproof housing for outdoor and exposed mounting — no extra enclosure required.
- 24V / 24W output from 802.3af/at PoE input for non-PoE cameras and APs.
- Single-cable installation with no local AC outlet; UPS-backed at the switch.
- Plug-and-play 10/100Mbps, compact and ruggedized.
- CE/FCC/RoHS certified; 100% inspection at ANPA’s single Chaozhou factory.
Compatible & Related Products
Pair the AP-2402S with any 802.3af/at switch — for outdoor camera networks the Fast Ethernet AP-1028KE or 16-port AP-10216KE (both with 250m extend) reach distant cameras; gigabit projects use the AP-3038GE. Need 48V output? See the AP-4820S waterproof splitter; need to add PoE to a non-PoE switch? Use the AP-4805I injector.
Frequently Asked Questions
1. What does a PoE splitter do?
It connects between a PoE source (switch or injector) and a device without PoE input, separating the Ethernet cable into a data connection and a low-voltage DC lead. The AP-2402S delivers 24V at up to 24W for cameras and APs with a 24V power input.
2. Is the AP-2402S suitable for outdoor use?
Yes. It features a waterproof housing designed for outdoor mounting at the camera or AP location, resisting rain and humidity. As with all outdoor connectors, keep connections from standing water and use appropriate weatherproofing best practice.
3. What output voltage does it provide?
The AP-2402S outputs 24V (up to 24W). Check your device’s required voltage — ANPA also offers the AP-4820S for 48V output and the AP-4825S / AP-4820GI for 12V output.
4. What PoE standard does it accept?
It accepts IEEE 802.3af/at PoE input at 10/100Mbps from any compliant PoE switch or injector.
5. Does the splitter need configuration?
No. It is completely plug-and-play: PoE cable in, data and power leads out. No software or management interface is required.
6. Do I need a power outlet near the camera?
No. Power arrives over the Ethernet cable from the PoE switch, so the camera location needs only the cable — and the switch can sit on a UPS for backup power.
7. Can ANPA supply this splitter under OEM/ODM?
Yes. ANPA manufactures the AP-2402S in-house with custom logo, packaging and documentation at an MOQ of 2 pieces. Contact us for a project quotation.
Get a Quote from the Manufacturer
Ready to specify the AP-2402S for your project? ANPA ships factory-direct worldwide with flexible MOQs, OEM/ODM customization and CE/FCC/RoHS documentation. Tell us your port count, power and quantity requirements and our team will reply with pricing and lead time.
ANPA sells factory-direct with wholesale and OEM/ODM terms. Pricing is quoted per project — contact our sales team for volume discounts and lead times.