The ANPA AP-5V02S is a specialized 5V PoE splitter with a micro-USB output, designed to power 5V USB devices — Android-based cameras and tablets, Raspberry Pi and single-board computers, small IoT gateways and displays — directly from a PoE cable. It takes an IEEE 802.3af PoE input and delivers a 10/100Mbps data feed plus a 5V micro-USB power lead (10W), so 5V devices can run over structured Ethernet cabling without a USB charger at the location. It is the simple, plug-and-play bridge between PoE infrastructure and the growing world of 5V connected devices. Request a quote for project and OEM pricing.
ANPA sells factory-direct with wholesale and OEM/ODM terms. Pricing is quoted per project — contact our sales team for volume discounts and lead times.
Product Specifications
| Model | AP-5V02S |
|---|---|
| Category | POE Switch Accessories |
| Ports Configuration | 1 in 1 out |
| Transmission Rate | 10/100Mbps |
| PoE Standard | IEEE 802.3af |
| Power Budget | 10W |
| Key Features | Micro USB Output |
| MOQ | 2 pieces |
Product Overview
Most PoE splitters output 12V for traditional CCTV, but a fast-growing category of endpoints — Android panels, tablets used as kiosks, Raspberry Pi and maker/IoT boards, USB-powered sensors and small controllers — run on 5V via micro-USB. The AP-5V02S is purpose-built for these: it receives standard 802.3af PoE, passes through the 10/100Mbps data to the device’s Ethernet (or acts as the network feed where applicable) and converts the power to a clean 5V micro-USB output up to 10W.
This eliminates the common problem of finding a USB charger near a wall-mounted tablet, kiosk or IoT node: power now comes from the PoE switch over the same infrastructure used for cameras and APs, and can be protected by the switch’s UPS. The unit is fully plug and play with automatic PoE detection and LED status, and its compact size hides behind displays or inside enclosures.
For standard 12V/15.4W splitting use the AP-SP01; for gigabit isolated use the AP-G24S. The AP-5V02S covers the 5V/micro-USB niche that those do not. Every unit is CE, FCC and RoHS certified and produced in ANPA’s Chaozhou, Guangdong factory under the 9-step QC program with 100% inspection.
Application Scenarios
Android Panels & Kiosks
Wall-mounted Android tablets used as meeting-room panels, reception kiosks and POS displays get 5V power and network over a single PoE run — no visible USB charger.
Raspberry Pi & Single-Board Computers
Power Raspberry Pi and similar 5V boards deployed for digital signage, automation or monitoring while delivering their wired network connection from the PoE infrastructure.
IoT Gateways & USB-Powered Sensors
Run small IoT gateways, controllers and USB-powered sensors in locations without spare outlets, sourcing power from the PoE switch backed by a UPS.
Custom OEM & Integrated Devices
Integrators building Android-based or 5V powered products can standardize on PoE delivery with the micro-USB splitter for a clean, professional install.
Why Choose ANPA
ANPA has manufactured PoE networking equipment since 2006 — 20 years of production experience. Every switch and accessory is built in our single 15,000 m² facility in Chaozhou, Guangdong (with a dedicated R&D center in Shenzhen), across 8 production lines and 16 sets of assembly and test equipment. Our 3 R&D engineers and 7 QA/QC specialists enforce a rigorous 9-step quality control process with 100% inspection, full-load burn-in and CE, FCC and RoHS certification on every batch.
- Purpose-built 5V micro-USB output for Android, tablet, Raspberry Pi and USB-IoT devices.
- Converts 802.3af PoE into 5V (10W) plus 10/100Mbps data over one cable.
- Plug-and-play with auto detection and LED status; compact enough to hide behind displays.
- CE/FCC/RoHS certified; built in ANPA’s Chaozhou factory with 100% inspection.
Compatible & Related Products
For traditional cameras needing 12V/15.4W use the AP-SP01; for gigabit isolated use the AP-G24S or outdoor AP-G48S; for 12V rain-proof budget use the AP-1220S. Supply PoE from an injector (AP-2424AP) or an ANPA PoE switch such as the AP-1028MN; browse the Fast Ethernet series guide.
Frequently Asked Questions
1. What is special about the AP-5V02S versus other splitters?
It outputs 5V over a micro-USB connector instead of the usual 12V barrel plug, specifically to power Android devices, tablets, Raspberry Pi and other 5V USB-IoT equipment from PoE cabling.
2. What input does it require?
It accepts standard IEEE 802.3af PoE input on a 10/100Mbps link and converts the power to a 5V micro-USB feed up to 10W, while passing the data connection to the device.
3. Can it power a Raspberry Pi or Android tablet?
Yes — that is its intended use. It provides the 5V micro-USB power these devices need (up to 10W) along with the wired network connection over a single Ethernet run, replacing a USB charger and separate network drop.
4. Does it support gigabit?
No, it is a 10/100Mbps splitter, matching the modest data needs of most 5V USB devices. For gigabit endpoints use the AP-G24S or AP-G48S gigabit splitters.
5. Is any configuration needed?
No. Connect the PoE cable to the input, the data lead and the micro-USB lead to the device; power detection and conversion are automatic, with an LED showing status.
6. Why power 5V devices from PoE instead of a USB charger?
PoE delivery removes the need for an outlet near the device, allows all endpoints to be backed by the PoE switch’s UPS, and uses the same structured cabling as cameras and APs — cleaner for wall-mounted kiosks and IoT nodes.
7. What are MOQ and OEM options?
MOQ is 2 pieces. ANPA offers OEM/ODM customization including logo, packaging, connector options and labeling from its own factory. Request a quote for details.
Get a Quote from the Manufacturer
Ready to specify the AP-5V02S for your project? ANPA ships factory-direct worldwide with flexible MOQs, OEM/ODM customization and CE/FCC/RoHS documentation. Tell us your port count, power and quantity requirements and our team will reply with pricing and lead time.
ANPA sells factory-direct with wholesale and OEM/ODM terms. Pricing is quoted per project — contact our sales team for volume discounts and lead times.