The ANPA AP-G24S is an isolated gigabit PoE splitter for powering non-PoE gigabit devices over PoE infrastructure. It accepts an IEEE 802.3af/at input (DC44–57V) and splits it into a 10/100/1000Mbps data feed plus isolated 12V power (24W), delivering clean, protected power to gigabit cameras, wireless bridges, kiosks and other equipment without a PoE port. The isolated design blocks ground loops and shields sensitive electronics, making it the preferred choice for professional, high-reliability gigabit retrofits. Request a quote for OEM and volume pricing.
ANPA sells factory-direct with wholesale and OEM/ODM terms. Pricing is quoted per project — contact our sales team for volume discounts and lead times.
Product Specifications
| Model | AP-G24S |
|---|---|
| Category | POE Switch Accessories |
| Ports Configuration | 1 in 1 out |
| Transmission Rate | 10/100/1000Mbps |
| PoE Standard | IEEE 802.3af/at |
| Power Budget | 24W |
| Key Features | Isolated, Gigabit |
| MOQ | 2 pieces |
Product Overview
Gigabit devices that lack PoE — certain PTZ cameras, high-resolution non-PoE IP cameras, gigabit wireless bridges and industrial controllers — can still be powered over structured cabling with a splitter. The AP-G24S sits at the device end of a PoE run: it receives data plus 802.3af/at power (DC44–57V input) and outputs gigabit data to the device’s Ethernet port alongside converted 12V DC power (24W), all automatically detected and negotiated.
The key feature is galvanic isolation. An isolated splitter electrically separates the PoE source from the powered device, preventing ground-loop currents that can cause noise, reboots or hardware damage when equipment is on different earth potentials — a common issue in larger buildings and long cable runs. This isolation, combined with gigabit throughput, makes the AP-G24S the professional pick for sensitive and high-value endpoints.
Installation is plug-and-play: PoE cable in, Ethernet lead out to the device, 12V lead to the power jack, with LED status and no configuration. The compact housing suits indoor and protected mounting. For an outdoor-rated isolated gigabit splitter, see the AP-G48S; for a budget 10/100 non-isolated unit, see the AP-1220S. Every AP-G24S is CE, FCC and RoHS certified and built in ANPA’s Chaozhou factory.
Application Scenarios
Gigabit Non-PoE Cameras
Power 4K/PTZ or third-party gigabit cameras that use an external 12V supply, delivering full 1000Mbps data and isolated 12V power over one cable from the PoE switch.
Ground-Loop-Prone Buildings
In multi-floor and multi-building installs where earth potentials differ, the isolated output eliminates ground-loop noise and reboot problems that plague non-isolated splitters.
Wireless Bridges & Backhaul Links
Power gigabit wireless bridges and point-to-point links mounted high or remotely, using PoE from the equipment room and clean isolated 12V conversion at the device.
Kiosks, Digital Signage & Industrial Devices
Connect and power gigabit kiosks, signage players and controllers without local adapters, with isolation protecting sensitive industrial electronics.
Why Choose ANPA
ANPA has manufactured PoE networking equipment since 2006 — 20 years of production experience. Every switch and accessory is built in our single 15,000 m² facility in Chaozhou, Guangdong (with a dedicated R&D center in Shenzhen), across 8 production lines and 16 sets of assembly and test equipment. Our 3 R&D engineers and 7 QA/QC specialists enforce a rigorous 9-step quality control process with 100% inspection, full-load burn-in and CE, FCC and RoHS certification on every batch.
- Splits 802.3af/at PoE into gigabit data + isolated 12V (24W) for non-PoE endpoints.
- Galvanic isolation blocks ground loops and protects sensitive, high-value equipment.
- Accepts DC44-57V input; plug-and-play with LED status and no configuration.
- CE/FCC/RoHS certified; quality-controlled in ANPA’s Chaozhou factory with 100% inspection.
Compatible & Related Products
For exposed outdoor use choose the isolated outdoor AP-G48S; for budget 10/100 non-isolated use the AP-1220S; for basic 15.4W indoor use the AP-SP01. Supply PoE from a gigabit injector AP-2448GP or gigabit switch AP-3028GE (see the gigabit series guide).
Frequently Asked Questions
1. When should I choose an isolated splitter like the AP-G24S?
Choose isolated when powering sensitive or high-value devices, when the source and device may be on different ground potentials (long runs, multi-building sites), or when you want maximum protection against ground loops and electrical noise. Non-isolated splitters are cheaper but share a ground path.
2. What input and output does the AP-G24S use?
It accepts IEEE 802.3af/at PoE input (DC44–57V) and outputs a 10/100/1000Mbps data feed plus 12V DC power at up to 24W. Confirm your device takes 12V and a gigabit Ethernet connection.
3. Does it support gigabit speed?
Yes. Both the input and data output run at 10/100/1000Mbps, so it is suitable for 4K cameras, gigabit bridges and other high-bandwidth endpoints — unlike 10/100-only splitters.
4. How does a splitter differ from an injector?
An injector adds power to a cable at the switch end; a splitter removes power at the device end and presents it as a separate DC lead. They are often used as a pair to connect non-PoE switches to non-PoE devices over a powered cable.
5. Is any setup required?
No — plug-and-play. Connect the PoE source to the input, the Ethernet lead to the device and the 12V lead to the device’s power connector. Detection and conversion are automatic with status LED.
6. Can it be used outdoors?
The AP-G24S is intended for indoor or protected mounting. For weather-exposed outdoor gigabit splitting, use the isolated outdoor AP-G48S.
7. What are MOQ and customization terms?
MOQ is 2 pieces. ANPA provides OEM/ODM logo, packaging and labeling from its Chaozhou factory. Request a quote for project pricing.
Get a Quote from the Manufacturer
Ready to specify the AP-G24S for your project? ANPA ships factory-direct worldwide with flexible MOQs, OEM/ODM customization and CE/FCC/RoHS documentation. Tell us your port count, power and quantity requirements and our team will reply with pricing and lead time.
ANPA sells factory-direct with wholesale and OEM/ODM terms. Pricing is quoted per project — contact our sales team for volume discounts and lead times.