The ANPA AP-1220S is a PoE splitter that lets a non-PoE device benefit from PoE cabling. Connected at the device end, it takes a single 802.3af PoE input and splits it back into separate data and DC power — delivering 12V / 2A (24W) plus a 10/100Mbps Ethernet feed to cameras, wireless bridges and other devices that lack their own PoE input. With a rain-proof, non-isolated design it is the cost-effective choice for protected and semi-outdoor retrofits where you want to reuse PoE infrastructure to power legacy or third-party 12V equipment. Request a quote for volume terms.
ANPA sells factory-direct with wholesale and OEM/ODM terms. Pricing is quoted per project — contact our sales team for volume discounts and lead times.
Product Specifications
| Model | AP-1220S |
|---|---|
| Category | POE Switch Accessories |
| Ports Configuration | 1 in 1 out |
| Transmission Rate | 10/100Mbps |
| PoE Standard | IEEE 802.3af |
| Power Budget | 24W |
| Key Features | Rain-proof, Non-isolated |
| MOQ | 2 pieces |
Product Overview
A PoE splitter does the opposite of an injector: the cable arrives carrying data and PoE power, and the splitter separates the two. Data goes to the device’s Ethernet port, while the power is tapped off and converted to the voltage the device needs — here, 12V DC at up to 2A (24W). This lets non-PoE devices (older cameras, access-point bridges, controllers) be powered from a PoE switch or injector over the same cable, eliminating local wall adapters.
The AP-1220S is a 10/100Mbps, 802.3af input splitter with a rain-proof, non-isolated design. The rain-proof construction tolerates damp, protected locations such as covered exterior walls, eave-mounted boxes and basement/car-park ceilings. The non-isolated power conversion keeps the unit compact and economical, making it a value choice for budget-driven projects that do not require full galvanic isolation — for strict isolation needs, ANPA offers the isolated gigabit splitters AP-G24S and AP-G48S.
Setup is simple: connect the PoE cable to the input, the Ethernet lead to the device’s data port, and the 12V DC lead to the device’s power jack. The splitter handles detection and conversion automatically, with LED status. Every AP-1220S is CE, FCC and RoHS certified and produced in ANPA’s Chaozhou, Guangdong factory under the standard 9-step QC with 100% inspection.
Application Scenarios
Powering Non-PoE Cameras over PoE Cabling
Reuse existing PoE switches and cabling to power legacy or third-party 12V IP cameras that have no PoE port — the splitter delivers separate 12V power and data at the camera.
Protected / Semi-Outdoor Retrofits
Eave-mounted, covered-walkway and car-park devices in damp but rain-shielded locations benefit from the rain-proof housing without the cost of fully isolated outdoor hardware.
Wireless Bridges & Remote Equipment
Power 12V wireless bridges, small controllers or sensors mounted where no AC outlet exists, using PoE carried from the indoor equipment room.
Budget Projects & Installer Stock
For cost-sensitive projects that need 12V/2A output and 10/100Mbps, the non-isolated design provides a competitive bill of materials while remaining CE/FCC/RoHS certified.
Why Choose ANPA
ANPA has manufactured PoE networking equipment since 2006 — 20 years of production experience. Every switch and accessory is built in our single 15,000 m² facility in Chaozhou, Guangdong (with a dedicated R&D center in Shenzhen), across 8 production lines and 16 sets of assembly and test equipment. Our 3 R&D engineers and 7 QA/QC specialists enforce a rigorous 9-step quality control process with 100% inspection, full-load burn-in and CE, FCC and RoHS certification on every batch.
- Converts 802.3af PoE into separate 12V/2A power + 10/100Mbps data for non-PoE devices.
- Rain-proof housing for damp, protected/semi-outdoor mounting locations.
- Economical non-isolated design — strong value for budget-driven CCTV retrofits.
- CE/FCC/RoHS certified; built in ANPA’s 15,000 m² Chaozhou factory with 100% inspection.
Compatible & Related Products
Need isolation or gigabit? Choose the isolated gigabit AP-G24S or outdoor isolated AP-G48S; for standard indoor 15.4W splitting use the AP-SP01. Provide PoE at the source with an injector (AP-2424AP) or an ANPA PoE switch like the AP-1028PE.
Frequently Asked Questions
1. What does a PoE splitter do?
It separates a PoE cable back into data and power. The data goes to the device’s Ethernet port while the power is converted to the device’s required voltage (12V for the AP-1220S), letting a non-PoE device be powered over PoE cabling without a wall adapter.
2. What is the difference between isolated and non-isolated splitters?
An isolated splitter provides galvanic separation between the PoE input and the device power, blocking ground loops and offering extra protection for sensitive equipment. A non-isolated splitter like the AP-1220S shares a common ground and is more compact and economical — suitable for standard, cost-sensitive installs. Choose isolated for sensitive devices or noisy/long exterior runs.
3. What output voltage does the AP-1220S provide?
It outputs 12V DC at up to 2A (24W), from an 802.3af PoE input over a 10/100Mbps link. Confirm your device accepts 12V and its current draw is within 2A before specifying.
4. Is it suitable for outdoor use?
It has a rain-proof build for damp, protected locations (eaves, covered walkways, car parks). For open-air exposure, ANPA recommends a fully outdoor, isolated model such as the AP-G48S.
5. Does the splitter require configuration?
No — it is plug-and-play. Connect the PoE input, the data lead and the 12V power lead; detection and conversion are automatic and an LED confirms status.
6. Can it work with any PoE switch?
It works with standard IEEE 802.3af PoE sources, including ANPA switches and injectors. For higher-power or gigabit source links, the gigabit splitters (AP-G24S/AP-G48S) are the matching choice.
7. What are MOQ and OEM options?
MOQ is 2 pieces. ANPA offers OEM/ODM logo, packaging and labeling services from its own factory. Request a quote for details.
Get a Quote from the Manufacturer
Ready to specify the AP-1220S for your project? ANPA ships factory-direct worldwide with flexible MOQs, OEM/ODM customization and CE/FCC/RoHS documentation. Tell us your port count, power and quantity requirements and our team will reply with pricing and lead time.
ANPA sells factory-direct with wholesale and OEM/ODM terms. Pricing is quoted per project — contact our sales team for volume discounts and lead times.