The ANPA AP-2424AP is a compact PoE injector that adds Power over Ethernet to any ordinary, non-PoE network switch for a single device. It combines the data signal from your switch with DC power on one output cable, delivering 24V / 1.0A (24W) over 10/100Mbps Ethernet to a PoE-powered camera, AP or other device — so you can power remote equipment over the existing Cat5e/Cat6 cable without upgrading the switch or installing a local power adapter. Plug-and-play and compact, it is the economical way to add one powered drop to an existing network. Request a quote for multi-pack and OEM pricing.
ANPA sells factory-direct with wholesale and OEM/ODM terms. Pricing is quoted per project — contact our sales team for volume discounts and lead times.
Product Specifications
| Model | AP-2424AP |
|---|---|
| Category | POE Switch Accessories |
| Ports Configuration | 2 Port |
| Transmission Rate | 10/100Mbps |
| PoE Standard | IEEE 802.3af |
| Power Budget | 24W |
| Key Features | PoE Injector |
| MOQ | 5 pieces |
Product Overview
A PoE injector (also called a midspan) solves a simple, common problem: you have a switch without PoE, but one device — a camera, wireless AP or IP phone — needs power delivered over its Ethernet cable. The injector sits between switch and device on that single link: data arrives from the switch on one port, the injector adds DC power to the cable, and a combined data-plus-power signal leaves the PoE port. No switch replacement is needed, and no configuration is involved.
The AP-2424AP is a 24V, 10/100Mbps injector providing 24W (24V/1.0A). It is designed for devices that accept 24V PoE and for 10/100Mbps links typical of CCTV and simple AP deployments. Its two-port layout (one data input, one PoE output) makes installation a matter of three cables: switch to injector, power source to injector, injector to device. Link and power LEDs confirm operation at a glance.
Because injectors are deployed one-per-powered-device, they are ideal for adding a handful of PoE drops to a network that otherwise uses a standard switch, or for spares and service stock. For standard 48V gigabit PoE+ requirements (including 802.3af/at/bt and Wi-Fi 6 devices), use ANPA’s gigabit injector AP-2448GP. Every AP-2424AP is CE, FCC and RoHS certified and produced in ANPA’s Chaozhou factory under 9-step QC with 100% inspection.
Application Scenarios
Adding PoE to a Non-PoE Switch
Upgrade a single link on an existing standard switch to power an IP camera or AP without replacing the switch — ideal for small networks and retrofits where PoE was not originally planned.
Single Remote Device Power
Power one remote device (ceiling AP, doorway camera) over its data cable, avoiding an extra AC outlet and wall adapter at the device location.
Service Stock & Spares
Installers and distributors keep injectors on hand to quickly enable a PoE drop during service calls, additions or troubleshooting without revisiting the core switch.
24V PoE Device Compatibility
Use with devices that accept 24V PoE on 10/100Mbps links; confirm your device’s voltage requirement, or select the 48V gigabit AP-2448GP for standard 802.3af/at/bt endpoints.
Why Choose ANPA
ANPA has manufactured PoE networking equipment since 2006 — 20 years of production experience. Every switch and accessory is built in our single 15,000 m² facility in Chaozhou, Guangdong (with a dedicated R&D center in Shenzhen), across 8 production lines and 16 sets of assembly and test equipment. Our 3 R&D engineers and 7 QA/QC specialists enforce a rigorous 9-step quality control process with 100% inspection, full-load burn-in and CE, FCC and RoHS certification on every batch.
- Adds PoE to any non-PoE switch on a single link — no switch upgrade or re-cabling.
- 24V/1.0A (24W) over 10/100Mbps, two-port plug-and-play design with status LEDs.
- Compact, economical and ideal for retrofits, single-device drops and service stock.
- CE/FCC/RoHS certified; built in ANPA’s 15,000 m² Chaozhou factory with 100% inspection.
Compatible & Related Products
Need gigabit 48V PoE for 802.3af/at/bt devices? Use the AP-2448GP gigabit injector. To power a non-PoE device from a PoE switch, pair with a splitter such as the AP-SP01 or gigabit AP-G24S. For multiple PoE devices, an ANPA PoE switch (e.g. AP-1028PE) is more efficient — see the Fast Ethernet series guide.
Frequently Asked Questions
1. What is a PoE injector used for?
A PoE injector adds power to an Ethernet cable so a PoE-powered device can run from a switch that has no PoE capability. You connect the switch’s data port and power to the injector, which outputs a combined data+power cable to the camera, AP or phone — no switch upgrade required.
2. What is the difference between the AP-2424AP and AP-2448GP?
The AP-2424AP is a 24V, 10/100Mbps injector delivering 24W, suited to devices that accept 24V PoE and Fast Ethernet links. The AP-2448GP is a 48V gigabit injector supporting IEEE 802.3af/at/bt up to 30W for standard PoE/PoE+ and high-power devices on gigabit links.
3. Do I need an injector for each PoE device?
When using injectors, yes — each injector powers one device over one link. If you need to power many devices, a PoE switch (such as the ANPA AP-1028PE) is the more efficient choice; injectors are best for adding one or a few drops to a non-PoE network.
4. Is the injector plug-and-play?
Yes. Connect the data input from your switch, the power supply, and the output to the device — it auto-combines data and power with no software or configuration. LEDs show power and link status.
5. Will it work with gigabit devices?
The AP-2424AP operates at 10/100Mbps and outputs 24V. For gigabit links or devices requiring standard 48V 802.3af/at/bt PoE (including Wi-Fi 6 APs), choose the gigabit AP-2448GP.
6. Can I use an injector and a splitter together?
Yes — a common pair: an injector adds PoE at the switch end, and a PoE splitter (e.g. AP-SP01) at the device end separates power back out for a non-PoE device. Together they let ordinary (non-PoE) switches and non-PoE devices work over long powered cable runs.
7. What MOQ applies and can it be OEM-branded?
The AP-2424AP has an MOQ of 5 pieces, convenient for distributor multi-packs. ANPA offers OEM/ODM branding, packaging and labeling — request a quote for details.
Get a Quote from the Manufacturer
Ready to specify the AP-2424AP for your project? ANPA ships factory-direct worldwide with flexible MOQs, OEM/ODM customization and CE/FCC/RoHS documentation. Tell us your port count, power and quantity requirements and our team will reply with pricing and lead time.
ANPA sells factory-direct with wholesale and OEM/ODM terms. Pricing is quoted per project — contact our sales team for volume discounts and lead times.